Cisco Cisco Aironet 1250 Series Access Point 설치 가이드
5
EU Directives 1999/5/EC & 93/42/ECC: Compliance Information for the Cisco Aironet 1250 Series IEEE802.11 a/b/g/n Wireless LAN Products
78-18477-01
CE Marking
Note
The 5-GHz equipment employs a Dynamic Frequency Selection (DFS) mechanism which is required for
operation in the 5-GHz frequency range.
operation in the 5-GHz frequency range.
CE Marking
For the Cisco Aironet AIR-(L)AP1252G-E-K9, AIR-(L)AP1252AG-E-K9, AIR-RM1252G-E-K9, or
AIR-RM1252A-E-K9, the following CE mark, Notified Body number and Class-2 identifier are affixed
to the equipment and its packaging:
AIR-RM1252A-E-K9, the following CE mark, Notified Body number and Class-2 identifier are affixed
to the equipment and its packaging:
National Restrictions
In the majority of the EU and other European Countries, the 2.4- and 5-GHz bands have been made
available for the use of wireless LANs. Table 1 provides an overview of the regulatory requirements in
general applicable for the 2.4- and 5-GHz bands.
available for the use of wireless LANs. Table 1 provides an overview of the regulatory requirements in
general applicable for the 2.4- and 5-GHz bands.
Later in this section you will find an overview of countries in which additional restrictions or
requirements or both are applicable.
requirements or both are applicable.
The requirements for any country may evolve. Cisco recommends that you check with the local
authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs.
authorities for the latest status of their national regulations for both the 2.4- and 5-GHz wireless LANs.
Denmark
In Denmark, the band 5150 - 5350 MHz is also allowed for outdoor usage.
I Danmark må frekvensbåndet 5150 - 5350 også anvendes udendørs.
49325
Table 1
Overview of Regulatory Requirements for Wireless LANs
Frequency Band (MHz)
Max Power Level
(EIRP)
(EIRP)
1
(mW)
1.
Effective isotropic radiated power (EIRP).
Indoor ONLY
Indoor and Outdoor
2400–2483.5
100
X
5150–5350
2, 3
2.
Dynamic Frequency Selection and Transmit Power Control is required in the 5250- to 5350-MHz and 5470- to 5725-MHz
frequency range.
frequency range.
3.
The AIR-(L)AP1252G-E-K9 and the AIR-RM1252G-E-K9 operate only in 2400 - 2483.5 MHz band.
200
X
5470–5725
1
1000
X