Cisco Cisco Aironet 2600e Access Point 설치 가이드

Use only with listed ITE equipment.

To unpack the access point, follow these steps:

Unpack and remove the access point and the accessory kit from the shipping box.

Return any packing material to the shipping container and save it for future use.

Verify that you have received the items listed below. If any item is missing or damaged, contact your Cisco representative 
or reseller for instructions.

The access point

Mounting bracket (selected when you ordered the access point)

Adjustable ceiling-rail clip (selected when you ordered the access point)

The 2600 series access point contains two simultaneous dual-band radios, the 2.4-GHz and 5-GHz 802.11n MIMO radios, in 
controller-based and standalone models. The 2600 series access point’s radio configurations are:

AIR-CAP2602E-x-K9, AIR-SAP2602E-x-K9, AIR-AP2602E-UXK9—two 2.4-GHz/5-GHz dual-band radios with up to 4 
external dual-band dipole antennas

AIR-CAP2602I-x-K9, AIR-SAP2602I-x-K9, AIR-AP2602I-UXK9—two 2.4-GHz/5-GHz dual-band radios, with integrated 
dual-band inverted-F antennas

For information on the regulatory domains, see 

The 2602E models are configured with up to four external dual-band dipole antennas, and two 2.4-GHz/5-GHz dual-band 
radios. The radios and antennas support frequency bands 2400–2500 MHz and 5150–5850 MHz through a common dual-band 
RF interface. Features of the external dual-band dipole antennas are:

Four RTNC antenna connectors on the top of the access point

Three TX and four RX antennas

These antennas are supported on the 2602E:

Antenna  Part  Number

Antenna  Type

Antenna Gain  2 GHz / 5 GHz      
(dBi)

AIR-ANT2524DB-R

Dual-resonant black dipole

2/4

AIR-ANT2524DW-R

Dual-resonant white dipole

2/4

AIR-ANT2524DG-R

Dual-resonant gray dipole

2/4

AIR-ANT2524V4C-R

Dual-resonant, ceiling-mount omni 
(4-pack)

2/4

AIR-ANT2544V4M-R

Dual-resonant omni (4-pack)

4/4

AIR-ANT2566P4W-R

Dual-resonant Directional antenna 
(4-pack)

6/6