Cisco Cisco Aironet 2800i Access Point 설치 가이드

Translated versions of the following safety warnings are provided in the translated safety warnings 
document that is shipped with your access point. The translated warnings are also in the Translated 
Safety Warnings for Cisco Aironet Access Points, which is available on Cisco.com.

This warning symbol means danger. You are in a situation that could cause bodily injury. 
Before you work on any equipment, be aware of the hazards involved with electrical 
circuitry and be familiar with standard practices for preventing accidents. Use the 
statement number provided at the end of each warning to locate its translation in the 
translated safety warnings that accompanied this device. Statement 1071

Read the installation instructions before you connect the system to its power source. 
Statement 1004

Installation of the equipment must comply with local and national electrical codes. 
Statement 1074

This product relies on the building’s installation for short-circuit (overcurrent) 
protection. Ensure that the protective device is rated not greater than: 
20A. Statement 1005

Do not operate your wireless network device near unshielded blasting caps or in an 
explosive environment unless the device has been modified to be especially qualified for 
such use. Statement 245B

In order to comply with FCC radio frequency (RF) exposure limits, antennas should be 
located at a minimum of 12 inches (30 cm) or more from the body of all persons. 
Statement 332