Cisco Cisco Aironet 1810 OfficeExtend Access Point 데이터 시트
© 2016 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information.
Page 6 of 9
Item
Specification
◦
VHT40: 20 dBm with 2 antennas
◦
VHT80: 20 dBm with 2 antennas
◦
VHT20-STBC: 20 dBm with 2 antennas
◦
VHT40-STBC: 20 dBm with 2 antennas
◦
VHT80-STBC: 20 dBm with 2 antennas
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
specific details.
Available transmit
power settings
power settings
2.4 GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
5 GHz
20 dBm (100 mW)
17 dBm (50 mW)
14 dBm (25 mW)
11 dBm (12.5 mW)
8 dBm (6.25 mW)
5 dBm (3.13 mW)
2 dBm (1.56 mW)
-1 dBm (0.78 mW)
Note: The maximum power setting will vary by channel and according to individual country regulations. Refer to the product documentation for
specific details.
specific details.
Integrated antennas
● 2.4 GHz, gain 2 dBi
● 5 GHz, gain 5 dBi
● 5 GHz, gain 5 dBi
Interfaces
● One 10/100/1000BASE-T PoE uplink port
● Management console port (RJ-45)
● Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port:
● Management console port (RJ-45)
● Three 10/100/1000BASE-T ports (local Ethernet ports), including one PoE out port:
◦
PoE out provides 802.3af when access point is powered by Cisco local power supply (AIR-PWR-D=), or ~6.5W
when powered by 802.3at, or no output when powered by 802.3af
when powered by 802.3at, or no output when powered by 802.3af
● DC power connector
Indicators
● Status LED indicates boot loader status, association status, operating status, boot loader warnings, boot loader
errors
◦
For privacy, status LED is automatically turned off when the access point joins a controller
● Per-port status for local Ethernet ports
Dimensions
(W x L x H)
(W x L x H)
● Access point (without mounting bracket): 6.5 x 4.5 x 1.6 in. (165 x 114 x 41 mm)
Weight
● Access point without mounting bracket or any other accessories: 1.2 lb (560 g)
Environmental
● Nonoperating (storage) temperature: -22° to 158°F (-30° to 70°C)
● Nonoperating (storage) maximum altitude: 25°C, 15,000 ft (4,572m)
● Operating temperature: 32° to 104°F (0° to 40°C)
● Operating humidity: 10% to 90% percent (noncondensing)
● Operating maximum altitude: 40°C, 9843 ft (3,000m)
● Nonoperating (storage) maximum altitude: 25°C, 15,000 ft (4,572m)
● Operating temperature: 32° to 104°F (0° to 40°C)
● Operating humidity: 10% to 90% percent (noncondensing)
● Operating maximum altitude: 40°C, 9843 ft (3,000m)
System
● 512 MB DRAM
● 256 MB flash
● 1.4 GHz system dual-core CPU
● 256 MB flash
● 1.4 GHz system dual-core CPU
Input power
requirements
requirements
● 44 to 57V DC
● Optional power supply and power injector: 100 to 240V AC; 49 to 60 Hz
● Optional power supply and power injector: 100 to 240V AC; 49 to 60 Hz
Powering options
● 802.3af/at Ethernet switch
● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
● Optional Cisco local power supply (AIR-PWR-D=)
● Optional Cisco power injectors (AIR-PWRINJ5=, AIR-PWRINJ6=)
● Optional Cisco local power supply (AIR-PWR-D=)
Power draw
● Maximum values: 12.95W (15.4W with 100m of cable) with no PoE out, 20.7W (22W with 100m of cable) with
6.49W PoE out and 27.65W with 12.95W PoE out
Note: When deployed using PoE, the power draw numbers listed above include the power loss in 100m of cabling on
the uplink port and 100m of cabling on the PoE out port.
the uplink port and 100m of cabling on the PoE out port.
Physical security
● Kensington security slot