Cisco Cisco 5520 Wireless Controller 데이터 시트
Wireless CleanAir Deployment Guide
Smart Business Architecture
Figure 21.
Transfer Complete, Reboot Controller to Continue
Step 1:
Log into Cisco WCS.
Step 2:
Navigate to Configure > Controllers.
Step 3:
Select All Controllers.
Step 4:
From the right drop-down list, select Reboot Controllers.
Figure 22.
Reboot Controller
Step 5:
Click OK to the Warning “Warning: Please save configuration first.
Selected Controllers are going to be rebooted. Do you want to continue?”
Figure 23.
Warning: You Are About to Reload Your Controller!
Procedure 4: Add the Mobility Service Engine to the Wireless Control System
You must add the Mobility Service Engine to the Wireless Control System. Using
the WCS Comunication username and password that you used earlier will allow
Cisco WCS to poll the MSE database for historical context information. At a later
time, Wireless Intrusion Prevention System services can be added if needed.
You must add the Mobility Service Engine to the Wireless Control System. Using
the WCS Comunication username and password that you used earlier will allow
Cisco WCS to poll the MSE database for historical context information. At a later
time, Wireless Intrusion Prevention System services can be added if needed.
Step 1:
Log into WCS.
Step 2:
Navigate to Services > Mobility Services.
Figure 24.
New Mobility Service
Step 3:
From the drop-down list, select Add Mobility Services Engine and
click Go.
Figure 25.
Add Mobility Service Engine
15