Cisco Cisco Packet Data Gateway (PDG) 문제 해결 가이드
GGSN Service Configuration Mode Commands
▀ gtpu udp-checksum insert
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22948-01
gtpu udp-checksum insert
This command enables/disables the insertion of UDP checksum in outgoing UDP data packets. By default checksum
insertion is enabled.
insertion is enabled.
Product
GGSN
Privilege
Security Administrator, Administrator
Syntax
Disables insertion of UDP checksum in outgoing UDP data packets.
Enables the insertion of UDP checksum in outgoing UDP data packets.
Usage
Use this command to enable or disable the system to insert UDP checksum in outgoing UDP data packets.
Example
The following command specifies that the GGSN service will insert the UDP checksum into outgoing UDP data
packets:
The following command specifies that the GGSN service will insert the UDP checksum into outgoing UDP data
packets: