Cisco Cisco Packet Data Gateway (PDG) 문제 해결 가이드
Global Configuration Mode Commands
aaa domain-matching imsi-prefix ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
aaa domain-matching imsi-prefix
This command enables domain lookup for session based on the IMSI prefix length. Default: Disabled
Important:
This command is only available in Release 8.3 and later.
Product
All
Privilege
Security Administrator, Administrator
Syntax
Specifies the system must not consider imsi-prefix domain matching method.
Specifies the IMSI length to be matched with the domain.
must be an integer from 1 through 15.
Usage
Use this command to configure the IMSI-prefix method of domain matching. This command enables domain
lookup for the session based on the IMSI prefix length. If there is a domain configured with the matching
IMSI prefix, the associated configuration is used.
This feature does not support partial matches.
lookup for the session based on the IMSI prefix length. If there is a domain configured with the matching
IMSI prefix, the associated configuration is used.
This feature does not support partial matches.
Example
The following command configures the IMSI prefix method for domain matching setting the prefix length to
The following command configures the IMSI prefix method for domain matching setting the prefix length to
.