Cisco Cisco Tunnel Terminating Gateway (TTG) 문제 해결 가이드
HLR Configuration Mode Commands
imsi ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22948-01
imsi
This command sets up IMSI (International Mobile Subscriber Identity) -based configuration. (IMSI) prefix which
includes the Mobile Country Code (MCC), the Mobile Network Code (MNC).
includes the Mobile Country Code (MCC), the Mobile Network Code (MNC).
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Removes the imsi-prefix definition from the configuration.
Configures acceptance of any IMSI prefix.
Selects IMSI prefix-based routing.
is a string of up to 15 integers.
Enables configurable default behavior for routing.
Entering
Entering
with the
keyword preserves the default behavior and the E.212 address is used as a
destination address and the MAP request will be sent towards the HLR.
If this keyword is not used with the
If this keyword is not used with the
keyword, then the MAP request will be rejected.
Defines the E.164 number of the HLR.
is a string of integers, up to 15.
is a string of integers, up to 15.
Defines the point code for the HLR.
is a string of digits, up to 11; SS7 format preferred.
Selects HLR call process according to SCCP calling party address of the SGSN. This will be filled at MAP
level, including the ITU point code address.
level, including the ITU point code address.