Cisco Cisco Packet Data Gateway (PDG) 문제 해결 가이드
ATM Port Configuration Mode Commands
▀ snmp trap link-status
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
snmp trap link-status
Enables/disables the generation and sending of an SNMP (notification) trap when the port experiences a change of state
(up or down).
(up or down).
Product
SGSN
Privilege
Security Administrator, Administrator
Syntax
Disables the sending of traps for link-status changes.
Usage
Enable the sending of link-status change traps for this port if there is a monitoring facility that can use the
information or if there are troubleshooting activities in progress.
information or if there are troubleshooting activities in progress.
Example
Use the following command to send SNMP link-status traps for this port:
Use the following command to send SNMP link-status traps for this port:
Use the following command to disable the sending SNMP link-status traps for this port: