Cisco Cisco Packet Data Gateway (PDG) 문제 해결 가이드
CSCF Service Configuration Mode Commands
bind ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
Important:
The total session capacity of the system is 500,000.
is also limited by the capacity
in the license generated for the service. If licenses for PDSN/GGSN/HA are generated for number of sessions, then
the license for the CSCF service will be generated at 500,000- . Hardware configuration and installed features can also
affect the maximum number of sessions that can be supported.
the license for the CSCF service will be generated at 500,000- . Hardware configuration and installed features can also
affect the maximum number of sessions that can be supported.
Default: 5060
Specifies the UDP port number.
Specifies the UDP port number.
must be an integer value from 1 to 65534.
Default: 10
Specifies the call capacity percentage per session manager (sessmgr).
Specifies the call capacity percentage per session manager (sessmgr).
must be an integer value from 1 to 50.
Enables TCP transport for the address.
Enables use of service port for sending and receiving UDP messages from network elements.
Removes the binding of the service to a specified interface.
Usage
Use this command to associated the service with a specific logical IP address. This command also configures
the identity of the CSCF in SIP headers as either the domain name of the CSCF service or the IP address.
the identity of the CSCF in SIP headers as either the domain name of the CSCF service or the IP address.
Important:
Multiple keywords can be used per bind command.
Example
The following command binds the CSCF service to a logical interface with an IP address of
The following command binds the CSCF service to a logical interface with an IP address of
and sets the
maximum number of supported sessions for this interface at
: