Cisco Cisco Packet Data Gateway (PDG) 문제 해결 가이드
ACS Configuration Mode Commands
▀ p2p-dynamic-rules
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
Specifies the protocols for which signatures must be enabled for processing.
indicates that more than one of the keywords can be specified in the same command. Not applicable if the
option is selected first.
Usage
Use this command to enable/disable the P2P Dynamic Signature Updates feature, and load the P2P signature
file from the default or specified location. Optionally the specific protocol(s) for which the signatures must be
loaded can be specified.
file from the default or specified location. Optionally the specific protocol(s) for which the signatures must be
loaded can be specified.
Example
The following command enables the P2P Dynamic Signature Updates feature, and loads the signature file present in the
default location:
The following command enables the P2P Dynamic Signature Updates feature, and loads the signature file present in the
default location: