Cisco Cisco Packet Data Gateway (PDG) 문제 해결 가이드
SGSN Operator Policy Configuration Mode Commands
authenticate ▀
Cisco ASR 5000 Series Command Line Interface Reference ▄
OL-22947-02
: Defines the type of RAU Request. Select one of the following:
{
|
}
{
|
}
{
|
|
}
{
|
}
This keyword enables/disables authentication for service request.
Defines 1-in-N selective authentication of subscriber events - where an
event is an attach request, RAU, service request, activate-primary-PDP-context request, or detach
request. If the frequency is set for 12, then the SGN skips authentication for the first 11 events and
authenticates on the 12th event.
request. If the frequency is set for 12, then the SGN skips authentication for the first 11 events and
authenticates on the 12th event.
must be an integer from 1 to 16.
: Defines the length of time (number of minutes) that authentication can
be skipped.
: Must be an integer from 1 to 10800.
: Defines the service request type. Options include:
Usage
Use this command with the
keyword to determine the support for selective execution of the re-
authentication and/or P-TMSI reallocation procedure in case of a 3G service request.
Example
Configure authentication to occur after every 10th event for GPRS access.
Configure authentication to occur after every 10th event for GPRS access.
Disable authentication for Inter-RAT Attaches, use:
Enable authentication for Inter-RAT RAU of the combined IMSI type: