Cisco Cisco Packet Data Gateway (PDG) 문제 해결 가이드
ACS Rulebase Configuration Mode Commands
▀ tcp 2msl-timeout
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
tcp 2msl-timeout
This command configures how long to retain the TCP flow after the FIN has been acknowledged.
Product
ACS
Privilege
Security Administrator, Administrator
Syntax
Configures the default setting.
Default: 2 seconds
Default: 2 seconds
Disables the timeout and sets the system to delete the flow immediately upon seeing the FIN be
acknowledged.
acknowledged.
The period of time, in seconds, to keep the TCP flow.
must be an integer from 1 through 20.
Usage
Use this command to configures how long to retain the TCP flow after the FIN has been acknowledged.
Acknowledgment to the FIN is not guaranteed to be received by the destination, then the FIN could be resent
and re-acknowledged. In this scenario, it is desirable to still have the flow, so that the re-sends do not create a
new flow.
Acknowledgment to the FIN is not guaranteed to be received by the destination, then the FIN could be resent
and re-acknowledged. In this scenario, it is desirable to still have the flow, so that the re-sends do not create a
new flow.
Example
The following command sets the timeout to 4 seconds:
The following command sets the timeout to 4 seconds: