Cisco Cisco Tunnel Terminating Gateway (TTG) 문제 해결 가이드
Exec Mode Show Commands (D-G)
▀ show dhcp status
▄ Cisco ASR 5000 Series Command Line Interface Reference
OL-22947-02
show dhcp status
Displays configuration information for either a specific, or for all DHCP service and servers configured.
Product
GGSN, ASN-GW
Privilege
Security Administrator, Administrator, Operator, Inspector
Syntax
Displays information for all configured DHCP services.
Displays information for a specific DHCP service.
is the name of the service and can be from 1 to 63 alpha and/or numeric characters and is case
sensitive.
Displays status for a specific DHCP server.
is the IP address of the desired server and must be entered in dotted decimal notation.
Usage
This command is used to show/verify the status or configuration of one or all DHCP services along with
count of cumulative leased addresses and addresses leased at that time for monitoring or troubleshooting
purposes. The output is a concise listing of DHCP service parameter settings.
If this command is executed from within the local context with the all keyword, information for all DHCP
services configured on the system will be displayed.
count of cumulative leased addresses and addresses leased at that time for monitoring or troubleshooting
purposes. The output is a concise listing of DHCP service parameter settings.
If this command is executed from within the local context with the all keyword, information for all DHCP
services configured on the system will be displayed.
Example
The following command displays status of a DHCP service called ggsn_dhcp1:
The following command displays status of a DHCP service called ggsn_dhcp1:
State shown in display is consolidated across session managers, i.e. for each session manager, DHCP server have a
timestamp value associated with its state.
For a DHCP server, its timestamp value is compared for each session manager and the state associated with the latest
value is shown.
timestamp value associated with its state.
For a DHCP server, its timestamp value is compared for each session manager and the state associated with the latest
value is shown.
Important:
Output descriptions for commands are available in the Statistics and Counters Reference.