Cisco Cisco Packet Data Gateway (PDG) 문제 해결 가이드
System Element Configuration Procedures
Creating and Configuring Ethernet Interfaces and Ports ▀
Cisco ASR 5000 Series System Administration Guide ▄
OL-22969-02
Step 3
Verify that your static route(s) was configured properly by entering the following command:
This command produces an output similar to that displayed in the following example that shows a static route
to a gateway with an IP address of 192.168.250.1
to a gateway with an IP address of 192.168.250.1
Step 4
Save the configuration as described in the Verifying and Saving Your Configuration chapter.