Cisco Cisco Aironet 1400 Wireless Bridge 릴리즈 노트

The Cisco Aironet 1400 Series Bridge is a wireless device designed for building-to-building wireless 
connectivity. Operating in the 5.8-GHz UNII 3 band (5725 to 5825 MHz), derived from the 802.11a 
standard, the bridge delivers 6 to 54 Mbps data rates without the need for a license. The bridge is a 
self-contained unit designed for outdoor installations, providing differing antenna gains as well as 
coverage patterns and supports both point-to-point and point-to-multipoint configurations.

The bridge uses a browser-based management system, but you can also configure the bridge using the 
command-line interface (CLI) through a Telnet session, Cisco IOS commands, or Simple Network 
Management Protocol (SNMP).

You can install Cisco IOS Release 12.3(8)JEA1 on all 1400 series bridges. 

To find the version of Cisco IOS software running on your bridge, use a Telnet session to log into the 
bridge and enter the show version EXEC command. This example shows command output from a bridge 
running Cisco IOS Release 12.3(7)JA:

bridge> show version

Cisco Internetwork Operating System Software

IOS (tm) C1410 Software (C1410-K9W7-M), Version 12.3(7)JA

Copyright (c) 1986-2003 by Cisco Systems, Inc.

You can also find the software version on the System Software Version page in the bridge’s web-browser 
interface.

For instructions on installing access point software for your access point:

Click this link to go to the Product/Technology Support page:

Choose Wireless > Outdoor Wireless > Cisco Aironet 1400 Series, scroll down and click 
Configure Guides.

Click this link to browse to the Cisco IOS Software Center on Cisco.com:

On the Web page, log in to access the Feature Navigator or the Cisco IOS Upgrade Planner, or click 
Wireless Software to go to the Wireless LAN Software page.

No new bridge features are introduced in Cisco IOS Release 12.3(8)JEA1.