Cisco Cisco Aironet 340 Access Point-RP-TNC 문제 해결 가이드

Introduction
 Prerequisites
      Requirements
      Components Used
      Conventions
 Set Up VPN
      IP Security
      Adjust the MTU
 Related Information

Cisco Aironet Base Stations (BSM and BSE models) provide home users and small offices with wireless
connectivity to an intranet or the Internet. The Base Station Ethernet (BSE) model, with an Ethernet RJ−45
port, can be connected to the Internet by digital subscriber line (DSL) or cable modem. The Base Station
Modem (BSM) model is equipped with an integrated 56k v.90 dialup modem that enables multiple computers
to access the Internet through the legacy phone system.

A typical use of the Base Station unit is to access the Internet over either cable or DSL connection in
conjunction with Virtual Private Networking (VPN) technology to provide quick and secure access to the
company network.

It is easy to set up the Base Station unit with the Base Station Client Utility (BSCU). This document shows
how to set up the unit for use with VPN.

Readers of this document should have knowledge of these topics:

VPN network operation

• 

Base Station configuration

• 

The information in this document is based on the Cisco Aironet Base Station (BSM and BSE models).

The information in this document was created from the devices in a specific lab environment. All of the
devices used in this document started with a cleared (default) configuration. If your network is live, make sure
that you understand the potential impact of any command.

For more information on document conventions, refer to the Cisco Technical Tips Conventions.