Cisco Cisco Aironet 1400 Wireless Bridge 설치 가이드
5
Cisco Aironet 1400 Series Outdoor Wireless Bridge 28-dBi Dish Antenna
78-15547-01
Installation Notes
Figure 1
Installation details
Choosing a Mounting Location
The antenna is designed to create a highly directional radiation pattern. To achieve this pattern, the
antenna should be mounted clear of any obstructions that interfere with line-of-sight communications to
the device to which the bridge associates.
antenna should be mounted clear of any obstructions that interfere with line-of-sight communications to
the device to which the bridge associates.
Tools and Equipment Required
To install the antenna, you need the following tools and equipment:
•
A 9/16-in. (14-mm) open end wrench
•
A 3/8-in. (10-mm) open end wrench
•
A 7/16-in. (11-mm) socket driver
•
A 5/32-in. (4-mm) long shank hex key
•
Torque-limiting pliers (Milbar Model 45Z or equivalent)
•
Coaxial cable sealing compound (not provided)
The following sections contain procedures for installing the antenna. Choose the procedure that applies
to your situation. Use Figure 1 as a guide.
to your situation. Use Figure 1 as a guide.