Cisco Cisco Aironet 1310 Access Point Bridge 정보 가이드
All contents are Copyright © 1992–2006 Cisco Systems, Inc. All rights reserved. This document is Cisco Public Information.
Page 3 of 4
mounting bracket allows for an easy installation process. Mounting hardware is not shipped with the unit and must be ordered
separately.
Q.
What optional accessories are available for the Cisco Aironet 1300 Series?
A.
Additional accessories that can be ordered separately are:
●
Roof Mount Kit (AIR-ACCRMK1300=)
◦
Roof-mount mast (pole and mounting mast)
◦
Multifunction mount (allows mounting to roof-mount mast)
◦
Mounting hardware
◦
20-foot dual RG-6 cable assembly with F-Type connectors
◦
50-foot dual RG-6 cable assembly with F-Type connectors
◦
Coaxial sealant
◦
One grounding block
◦
Anticorrosion gel
◦
U-bolts
●
Wall Mount Kit (AIR-ACCWAMK1300=)
◦
Two 1-foot RG-59 power injector cables
◦
Wall-mount bracket
The Roof Mount Kit is available for use with the Cisco Aironet 1300 Series Wireless Bridge (integrated antenna and connectorized
versions). The Wall Mount Kit is available for use with the Cisco Aironet 1300 Series Wireless Bridge with RP-TNC type connector.
The Wall Mount Kit is for indoor use only.
For more information on accessories and ordering options, please consult the Cisco Aironet 1300 Series Ordering Guide at
http://www.cisco.com/en/US/prod/collateral/wireless/ps5679/ps5861/product_data_sheet09186a008022198b.html
.
Q.
What antenna options are available for the connectorized Cisco Aironet 1300 Series?
A.
The following antennas can be used with the Cisco Aironet 1300 Series:
●
AIR-ANT2506—5.2-dBi omnidirectional mast mount antenna
●
AIR-ANT24120—12-dBi omnidirectional mast mount antenna
●
AIR-ANT1949—13.5-dBi Yagi antenna
●
AIR-ANT2410Y-R—10-dBi Yagi antenna
●
AIR-ANT3338—21-dBi dish antenna
●
AIR-ANT2414S-R—14-dBi sector antenna
●
AIR-ANT1729—6-dBi patch antenna
Q.
Does the Cisco Aironet 1300 Series support inline power?
A.
Power is provided inline to the wireless bridge from the power injector, which must always be used. However, the system does not
draw power over the Ethernet cable from power-enabled switches or power panels.