Cisco Cisco Aironet 1400 Wireless Bridge 설치 가이드
Corporate Headquarters:
Copyright © 2003 Cisco Systems, Inc. All rights reserved.
Cisco Systems, Inc., 170 West Tasman Drive, San Jose, CA 95134-1706 USA
Cisco Aironet 1400 Series Wireless Bridge
Rooftop or Wall Mount Assembly Instructions
Rooftop or Wall Mount Assembly Instructions
The rooftop or wall mount is used to mount your bridge to a flat horizontal or vertical surface, such as
a building wall or roof. You must assemble the mount before you can use it.
a building wall or roof. You must assemble the mount before you can use it.
Unpacking the Mount
Follow these steps to unpack the mount:
Step 1
Open the shipping container and carefully remove the contents.
Step 2
Return all packing materials to the shipping container and save it.
Step 3
Ensure that all items listed in the
section are included in the shipment. If any item
is damaged or missing, notify your authorized Cisco sales representative.
Package Contents
Your mount package contains the following items:
•
Mast pipe
•
Mounting plate
•
Mounting hardware consisting of the following:
–
One long flanged hex bolt, 2 in. (5.08 cm)
–
Two carriage bolts, 0.5 in. (1.27 cm)
–
Four washers
–
Three flanged hex nuts