Cisco Cisco Aironet 1310 Access Point Bridge 릴리즈 노트

This feature provides scanner access points the ability to detect that WLAN management and control 
frames exceeded a configurable threshold.

This feature requires Cisco Aironet access points to detect and report on excessive attempted or failed 
authentication attempts (Authentication failure detection and Excess EAPoL authentication).

This feature requires a Scan-only access point to forward all 802.11 frames seen to a protocol analysis 
station for network troubleshooting from remote sites through partner applications or partner Intrusion 
Detection companies or both.

This feature allows a Cisco Aironet access point to detect frames from a LBS clients and send them to a 
pre-configured IP destination, such as a third-party LBS server.

This feature enables SNMPv3 support on Cisco Aironet access points to provide an additional level of 
security.

This section contains important information to keep in mind when installing your access point/bridge.