Cisco Cisco Aironet 1310 Access Point Bridge 릴리즈 노트
14
Release Notes for Cisco Aironet Access Points for Cisco IOS Release 12.3(8)JEA1
OL-12427-01
Important Notes
Mask Field on IP Filters Page Behaves the Same As in CLI
In Cisco IOS Release 12.2(8)JA and later, the mask that you enter in the Mask field on the IP Filters page
in the access point GUI behaves the same way as a mask that you enter in the CLI. If you enter
255.255.255.255 as the mask, the access point accepts any IP address. If you enter 0.0.0.0, the access
point looks for an exact match with the IP address that you entered in the IP Address field.
in the access point GUI behaves the same way as a mask that you enter in the CLI. If you enter
255.255.255.255 as the mask, the access point accepts any IP address. If you enter 0.0.0.0, the access
point looks for an exact match with the IP address that you entered in the IP Address field.
Repeater Access Points Running IOS Software Cannot Associate to Parent
Access Points Running VxWorks
Access Points Running VxWorks
Repeater access points running Cisco IOS software cannot associate to parent access points that do not
run IOS software (all 340 series access points, and 350 and 1200 series access points that have not been
converted to run IOS software).
run IOS software (all 340 series access points, and 350 and 1200 series access points that have not been
converted to run IOS software).
Repeater Access Points Cannot Be Configured as WDS Access Points
Repeater access points can participate in WDS but they cannot provide WDS. You cannot configure a
repeater access point as a main WDS access point, and if a root access point becomes a repeater in
fallback mode, it cannot provide WDS.
repeater access point as a main WDS access point, and if a root access point becomes a repeater in
fallback mode, it cannot provide WDS.
Crossover Cable Sometimes Needed When Ethernet Speed and Duplex Set to
Fixed on 1100 Series Access Points
Fixed on 1100 Series Access Points
If you change the speed and duplex settings from auto to fixed on an 1100 series access point’s Ethernet
port, the auto-MDIX feature on the port is disabled. When auto-MDIX is disabled, you must determine
whether to use a straight-through or a crossover cable to connect the access point Ethernet port to another
device. If the Ethernet link goes down after you set the speed and duplex to fixed, try changing the
Ethernet cable from crossover to straight-through or from straight-through to crossover.
port, the auto-MDIX feature on the port is disabled. When auto-MDIX is disabled, you must determine
whether to use a straight-through or a crossover cable to connect the access point Ethernet port to another
device. If the Ethernet link goes down after you set the speed and duplex to fixed, try changing the
Ethernet cable from crossover to straight-through or from straight-through to crossover.
Cannot Perform Link Tests on Non-Cisco Aironet Client Devices and on Cisco
Aironet 802.11g Client Devices
Aironet 802.11g Client Devices
The link test feature on the web-browser interface does not support non-Cisco Aironet client devices nor
Cisco Aironet 802.11g client devices.
Cisco Aironet 802.11g client devices.
System Software Upgrade Sometimes Fails Using Microsoft Internet Explorer
5.01 SP2
5.01 SP2
A system software upgrade sometimes fails when you use Microsoft Internet Explorer 5.01 SP2 to
upgrade system software using the TFTP Upgrade page in the web-browser interface. Use a later version
of Microsoft Internet Explorer to perform HTTP system software upgrades, or use TFTP to upgrade
system software. Click this URL to browse to the Cisco IOS Software Configuration Guide for Cisco
Aironet Access Points for complete instructions on performing software upgrades:
upgrade system software using the TFTP Upgrade page in the web-browser interface. Use a later version
of Microsoft Internet Explorer to perform HTTP system software upgrades, or use TFTP to upgrade
system software. Click this URL to browse to the Cisco IOS Software Configuration Guide for Cisco
Aironet Access Points for complete instructions on performing software upgrades: