Cisco Cisco Aironet 1310 Access Point Bridge 릴리즈 노트

CSCse70031—Access points running Cisco IOS Release 12.3(8)JA2 and configured for WPAv2 no 
longer sends its MAC address as the username in the ACS accounting records.

CSCsg48579— The no led display alternate command has been remove from the access point’s 
running configuration.

CSCse29487—Repeater-to-repeater roaming now occurs correctly.

CSCsf18528—Unexpected SNMP traffic no longer causes 1200 series access point to restart.

CSCsg05807—7920 phones roam correctly between MBSSID-enabled access points.

CSCsg26708—Access points running Cisco IOS Release 12.3(8)JA2 no longer stop passing 
broadcast traffic from the wired to wireless side.

CSCsg79644—1240 and 1230 access points in workgroup bridge and associated to a 1300 series 
bridge no longer stop broadcast and multicast traffic.

CSCsd62772—Radius accounting start/stop records are not sent, for associated client

CSCse84920—Access point no longer reloads with unknown system cause.

CSCse95836—Access point no longer forwards invalid ethernet frame, length=0 over wireless link.

CSCsf08775—EAP-FAST supplicant now authenticates correctly to a Steel Belt RADIUS server

CSCsg16033—A workgroup bridge associated to a root access point now appear when polling the 
Dot11 Client Configuration Info Table and Dot11 Client Statistics Table of the 
CISCO-DOT11-ASSOCIATION-MIB.

CSCsg20744—Disable MBSSID message now appears when configuring the access point in 
scanner mode.

CSCse72925—SNMP mib community-map command no longer causes a traceback and access 
point reload.

CSCsf95975—Access points no longer crash when AeroScout server address is misconfigured.

CSCsg44483—LEAPCL-3-TIMEOUT messages no longer appear on reauthentication/rekey.

CSCsg73790—Wired clients on a workgroup bridge now receive multicast traffic from an LWAPP 
access point.

CSCsg99358—1240 series no longer crashes in unconfigured VLAN on automated regression.

CSCsf95967—Access points running Cisco IOS Release 12.3(8)JEA now forward packets from 
AeroScout tags.

CSCsf22409—The FastEthernet interface no longer stops processing entries from the RX ring.

If you need information about a specific caveat that does not appear in these release notes, you can use 
the Cisco Bug Toolkit to find select caveats of any severity. Click this URL to browse to the Bug Toolkit:

(If you request a defect that cannot be displayed, the defect number might not exist, the defect might not 
yet have a customer-visible description, or the defect might be marked Cisco Confidential.)