Cisco Cisco Aironet 1310 Access Point Bridge 릴리즈 노트
3
Release Notes for Cisco Aironet 1310 Outdoor Access Point/Bridge for Cisco IOS Release 12.3(2)JA
OL-6723-01
New Features
New Features
This section lists new features in Cisco IOS Release 12.3(2)JA for the 1310 access point/bridge.
The Cisco Aironet 1310 Outdoor Access Point/Bridge supports the same Cisco IOS Software access
point features as Cisco Aironet 1100 Series Access Points in Cisco IOS Software Release 12.2(13)JA
and earlier Cisco IOS Software releases with the exception of radio management aggregation, Wireless
Domain Services (WDS), and IEEE 802.1X local authentication service.
point features as Cisco Aironet 1100 Series Access Points in Cisco IOS Software Release 12.2(13)JA
and earlier Cisco IOS Software releases with the exception of radio management aggregation, Wireless
Domain Services (WDS), and IEEE 802.1X local authentication service.
The 1310 access point/bridge supports the same Cisco IOS Software wireless bridge features as the
Cisco Aironet 1400 Series Wireless Bridge in Cisco IOS Software Release 12.2(13)JA and earlier Cisco
IOS Software releases with the exception of IEEE 802.11a.
Cisco Aironet 1400 Series Wireless Bridge in Cisco IOS Software Release 12.2(13)JA and earlier Cisco
IOS Software releases with the exception of IEEE 802.11a.
The following new features are supported by the 1310 access point/bridge:
•
HTTPS – HTTP with SSL 3.0
•
AES-CCMP (when in access point and bridge mode)
•
IEEE 802.1X local authentication service for EAP-FAST
•
Wi-Fi Multimedia (WWM) required elements
•
VLAN assignment by name
•
Microsoft WPS IE SSIDL
•
HTTP Web Server v1.1
•
IP-Redirect
To learn more about all the features supported by the 1310 access point/bridge, refer to the IOS Feature
Navigator at the following link on Cisco.com:
Navigator at the following link on Cisco.com:
HTTPS - HTTP with SSL 3.0
This feature supports a Secure Sockets Layer (SSL)/Secure Hypertext Transfer Protocol (HTTPS)
method of managing Cisco Aironet access points via a Web browser using HTTP.
method of managing Cisco Aironet access points via a Web browser using HTTP.
AES-CCMP
This feature is active when the 1310 is in the access point and bridge modes. The feature supports
Advanced Encryption Standard–Counter Mode with Cipher Block Chaining Message Authentication
Code Protocol (AES-CCMP). In the access point mode, the 1310 supports both AES-CCMP and WPA2.
In the bridge mode, the 1310 supports AES-CCMP but not WPA2 because WPA2 cannot be tested in the
bridge mode. AES-CCMP is required for Wi-Fi Protected Access 2 (WPA2) and IEEE 802.11i wireless
LAN security.
Advanced Encryption Standard–Counter Mode with Cipher Block Chaining Message Authentication
Code Protocol (AES-CCMP). In the access point mode, the 1310 supports both AES-CCMP and WPA2.
In the bridge mode, the 1310 supports AES-CCMP but not WPA2 because WPA2 cannot be tested in the
bridge mode. AES-CCMP is required for Wi-Fi Protected Access 2 (WPA2) and IEEE 802.11i wireless
LAN security.
IEEE 802.1X Local Authentication Service for EAP-FAST
This feature expands wireless domain services (WDS) IEEE 802.1X local authentication to include
support for Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling
(EAP-FAST). IEEE 802.1X local authentication was introduced in Cisco IOS Software release
12.2(11)JA.
support for Extensible Authentication Protocol-Flexible Authentication via Secure Tunneling
(EAP-FAST). IEEE 802.1X local authentication was introduced in Cisco IOS Software release
12.2(11)JA.