Cisco Cisco Aironet 1310 Access Point Bridge 설치 가이드

The following document provides detailed information about installing your 
access point/bridge:

This guide provides instructions for configuring your access point/bridge 
using its graphical user interface (GUI). You may also configure the access 
point/bridge through its console port to access the command line interface 
(CLI) and issue IOS commands. If you choose to use the CLI, please refer to 
the following documents for additional information and instructions:

In addition to the integrated antenna, the access point/bridge can be used with 
existing certified Cisco Aironet 2.4-GHz antennas. If you are using an 
optional external antenna, please refer to the applicable documentation for 
the specific antenna. Antenna documentation is shipped with the antenna.

With the exception of this guide, the documents identified in this section are 
available on Cisco.com. Follow this link to access them: