Cisco Cisco Aironet 350 Workgroup Bridges 릴리즈 노트
2
Release Notes for Cisco Aironet Workgroup Bridges Running Firmware Release 8.84
OL-4149-01
Introduction
Introduction
Workgroup bridges are small, standalone units that provide wireless infrastructure connections for
Ethernet-enabled devices. A device connected to a bridge communicates with a network infrastructure
through Cisco Aironet Access Points.
Ethernet-enabled devices. A device connected to a bridge communicates with a network infrastructure
through Cisco Aironet Access Points.
The workgroup bridge connects to a hub through a standard Ethernet port using a 10BASE-T/RJ-45
(twisted pair) connector, and up to eight client devices can be connected to the hub. You can use an
Internet browser or Telnet to configure the workgroup bridge.
(twisted pair) connector, and up to eight client devices can be connected to the hub. You can use an
Internet browser or Telnet to configure the workgroup bridge.
System Requirements
You must have a Cisco Aironet 350 Series Workgroup Bridge to install firmware version 8.84.
Minimum Firmware Version Required on Access Points
Access points with which the workgroup bridge associates must contain firmware version 11.06 or later.
Upgrading to a New Firmware Release
Finding the Firmware Version
The firmware version number is in the upper-left corner of most management screens in the web-browser
interface and at the top of the home (Summary Status) page in the command-line interface.
interface and at the top of the home (Summary Status) page in the command-line interface.
Upgrade Procedure
For instructions on installing access point and bridge firmware:
Step 1
Follow this link to the Software Center on Cisco.com and download firmware version 8.84:
Step 2
Select Option #1: Aironet Wireless Software Selector. The Aironet Wireless Software Selector
window appears.
window appears.
Step 3
Click the drop-down arrow to view the valid values for the Product Type field.
Step 4
Click Workgroup Bridge.
Step 5
Click Submit. The Step 2 of 3 page appears.
Step 6
Click the drop-down arrow to view the valid values in the Model Number field.
Step 7
Select the model number of your workgroup bridge.
Step 8
Click Submit. The Step 3 of 3 page appears.
Step 9
To download the current release, click the Current Release (Recommended) radio button.
Step 10
Click Submit. The software selector displays the categories you selected and lists the available
download methods.
download methods.