Cisco Cisco Aironet 350 Workgroup Bridges 릴리즈 노트
5
Release Notes for Cisco Aironet Workgroup Bridges Running Firmware Release 8.84
OL-4149-01
Caveats
A bridge loop can also occur if two or more workgroup bridges are connected to the same remote hub.
To prevent this bridge loop, always connect only one workgroup bridge to a remote hub. Figure 2 shows
the network configuration in which the loop occurs.
To prevent this bridge loop, always connect only one workgroup bridge to a remote hub. Figure 2 shows
the network configuration in which the loop occurs.
Figure 2
Bridge Loop Caused by Two Workgroup Bridges on the Same Remote Hub
Caveats
This section describes open and resolved caveats for firmware version 8.84.
Getting Bug Information on Cisco.com
If you are a Cisco.com registered user, you can use the Cisco TAC Software Bug Toolkit to identify
existing bugs (or caveats) in Cisco software products. Access the TAC Software Bug Toolkit at:
existing bugs (or caveats) in Cisco software products. Access the TAC Software Bug Toolkit at:
ETHERNET
SPEED
1
5
2
6
3
7
4
8
LED
100BaseTX
SOLID
10BaseT
BLINK
1X 2X
3X 4X
5X
6X
7X
MDI
MDI-X
8X
Wired LAN
Access point
Access point
Workgroup bridge
Workgroup bridge
Hub
44713