Cisco Cisco Aironet 1310 Access Point Bridge 릴리즈 노트
2
Release Notes for Cisco Aironet Access Points and Bridges for Cisco IOS Release 12.4(21a)JY
OL-20668-02
Introduction
Introduction
The Cisco Aironet Access Point is a wireless LAN transceiver that acts as the connection point between
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
wireless and wired networks or as the center point of a standalone wireless network. In large
installations, the roaming functionality provided by multiple access points enables wireless users to
move freely throughout the facility while maintaining uninterrupted access to the network.
You can configure and monitor 1130, 1140, 1240, 1250 series access points, and 1300 and 1400 series
access points/bridges by using the command-line interface (CLI), the web-browser interface, or Simple
Network Management Protocol (SNMP).
access points/bridges by using the command-line interface (CLI), the web-browser interface, or Simple
Network Management Protocol (SNMP).
System Requirements
You can install Cisco IOS Release 12.4(21a)JY on all 1130, 1140, 1240, 1250 series access points, 1300
series outdoor access point/bridges, and 1400 series bridges.
series outdoor access point/bridges, and 1400 series bridges.
Finding the Cisco IOS Software Release
To find the version of Cisco IOS software running on your access point, use a Telnet session to log into
the access point, and enter the show version EXEC command. This example shows command output
from an access point running Cisco IOS Release 12.4(21a)JY :
the access point, and enter the show version EXEC command. This example shows command output
from an access point running Cisco IOS Release 12.4(21a)JY :
ap1240AG> show version
Cisco Internetwork Operating System Software
IOS (tm) C1240 Software (C1240-K9W7-M), Version 12.4(21a)JY
Copyright (c) 1986-2009 by Cisco Systems, Inc.
On access points running Cisco IOS software, you can also find the software release on the System
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Software Version page in the access point’s web-browser interface. If your access point does not run
Cisco IOS software, the software release appears at the top left of most pages in the web-browser
interface.
Upgrading to a New Software Release
For instructions on installing access point software for your access point:
Step 1
Follow this link to the Cisco home page:
Step 2
Click Product & Services. A drop-down menu appears.
Step 3
Click Wireless. The Wireless Introduction page appears.
Step 4
Scroll down to the Product Portfolio section.
Step 5
In the Access Point section, select the access point model for which you need the information. The
Introduction page for the model you selected appears.
Introduction page for the model you selected appears.
Step 6
Under the Support section, click Configure. A list of configuration documents appears.
Step 7
Click Configuration Guides. The Configuration Guides page appears.