Cisco Cisco Aironet 350 Access Points 릴리즈 노트
11
Troubleshooting
OL-2434-01
Troubleshooting
•
Resolved: CSCdw18269—The Maximum Multicast Packets/Second setting now retains its value
after the access point or bridge reboots.
after the access point or bridge reboots.
•
Resolved: CSCdu19500—Access point no longer ignores vendor specific options from DHCP
servers. Access points now recognize the vendor specific option (VSO) sent from DHCP servers in
response to the access point’s vendor class identifier, also called a DHCP identifier in the access
point’s web browser interface and CLI.
servers. Access points now recognize the vendor specific option (VSO) sent from DHCP servers in
response to the access point’s vendor class identifier, also called a DHCP identifier in the access
point’s web browser interface and CLI.
•
Resolved: CSCdw31106—STP no longer causes excessive number of dropped packets.
•
Resolved: CSCdt34104—Filters can now edited from the CLI.
•
Resolved: CSCdw37840—When you enter a LEAP username and password for a repeater access
point or a non-root bridge on the Radio ID page and type apply, the password no longer disappears.
point or a non-root bridge on the Radio ID page and type apply, the password no longer disappears.
•
Resolved: CSCdu38857—Access point now displays a warning when it loads firmware from a
fallback FTP server.
fallback FTP server.
•
Resolved: CSCdv43046—Spanning Tree Protocol (STP) can now be disabled on 350 series bridges.
Note
Although you can disable STP on non-root 350 series bridges, 350 series bridges should link
only to other 350 series bridges, and 340 series bridges should link only to other 340 series
bridges. The 350 and 340 series bridges are not designed to interoperate.
only to other 350 series bridges, and 340 series bridges should link only to other 340 series
bridges. The 350 and 340 series bridges are not designed to interoperate.
•
Resolved: CSCdt59703—Non-root bridges with DHCP enabled now successfully receive an IP
address.
address.
•
Resolved: CSCds71375—You can now navigate successfully from the Update Firmware pages to
the FTP Server Setup through the CLI.
the FTP Server Setup through the CLI.
•
Resolved: CSCds71448—The FTP Server Setup page now retains settings entered through the CLI.
•
Resolved: CSCdu73907—When you use the Distribute Firmware feature, devices no longer install
the distributed firmware if they are already running that firmware version.
the distributed firmware if they are already running that firmware version.
•
Resolved: CSCdv88113—Enabling Message Integrity Check (MIC) without enabling WEP no
longer blocks communication with associated client devices.
longer blocks communication with associated client devices.
•
Resolved: CSCdw89810—Proxy servers no longer corrupt logs downloaded from access points and
bridges.
bridges.
•
Resolved: CSCdw89901—When you use an Ethertype filter to trace Aironet DDP packets, multicast
packets originated by the access point or bridge now appear in the log.
packets originated by the access point or bridge now appear in the log.
•
Resolved: CSCdv90749—Access point’s system time now maintains accuracy.
Troubleshooting
For the most up-to-date, detailed troubleshooting information, refer to the Cisco TAC website at
. Select Wireless LAN under Top Issues.