Cisco Cisco Aironet 1310 Access Point Bridge 릴리즈 노트

Beginning in privileged EXEC mode, follow these steps to disable the access point radios using the CLI:

If your access point has two radios, repeat these steps for the second radio. Use the no form of the 
shutdown command to enable the radio. 

This section contains information that you should keep in mind when installing 1040, 1130, 1140, 1240, 
1250 and 1260 series access points, and 1300 and 1400 access points/bridges.

This section contains installation notes for access points.

Cisco Aironet 1040, 1130, 1140, 1240, 1250 and 1260 Series Access Points provide adequate fire 
resistance and low smoke-producing characteristics suitable for operation in a building's environmental 
air space, such as above suspended ceilings, in accordance with Section 300-22(C) of the National 
Electrical Code (NEC) and Sections 2-128, 12-010(3) and 12-100 of the Canadian Electrical Code, Part 
1, C22.1.

The power injector does not provide fire resistance and low smoke-producing characteristics and is not 
intended for use in extremely high or low temperatures or in environmental air spaces such as above 
suspended ceilings.

Enter global configuration mode.

interface dot11radio {0 | 1}

Enter interface configuration mode for the radio interface. The 
2.4-GHz radio is radio 0, and the 5-GHz radio is radio 1.

Disable the radio port.

Return to privileged EXEC mode.

copy running-config startup-config (Optional) Save your entries in the configuration file.