Cisco Cisco Aironet 1310 Access Point Bridge 설치 가이드

Each access point package contains these items:

Access point unit (integrated antenna or external antenna configuration)

Power injector (LR2) unit 

Power module and AC power cord 

Product mounting instructions (this document)

Translated safety warnings document

Read Me document

Cisco product registration and documentation feedback cards

The optional roof mount kit contains these items:

One roof-wall mount

Two dual-coax cables [20 ft (6.1 m) and 50 ft (15.2 m)]

Multi-function mount (consisting of a access point bracket and a mast bracket) 

Two tower clamps (U-bolts) with four nuts and washers

Four bolts and washers for securing the access point bracket to the mast bracket

Four bolts for securing the access point bracket to the unit

Grounding block and mounting screws

Ground lug for the access point, two hex nuts, and two washers

Weatherproofing kit (consisting of Coax Seal and electrical joint compound)

The optional wall mount kit (for indoor use) contains these items:

Wall mount bracket with 4 mounting bolts and washers

Two sub-mini RG-59 coax cables (12 in. or 30.5 cm)

Translated versions of all the safety warnings are provided in the access point box and in Appendix A, 
“Translated Safety Warnings” section of the Cisco Aironet 1300 Series Outdoor Access Point/Bridge 
Hardware Installation Guide.

This warning symbol means danger. You are in a situation that could cause bodily injury. Before 
you work on any equipment, be aware of the hazards involved with electrical circuitry and be 
familiar with standard practices for preventing accidents. (To see translations of the warnings 
that appear in this publication, refer to the appendix “Translated Safety Warnings.”) Statement 84