Cisco Cisco Aironet 350 Access Points 릴리즈 노트
11
Release Notes for Cisco Aironet 350, 1100, and 1200 Series Access Points for Cisco IOS Release 12.2(13)JA1
OL-5170-01
Important Notes
Use force-reload Option with archive download-sw Command
When you upgrade access point or bridge system software by entering the archive download-sw
command on the CLI, you must use the force-reload option. If the access point or bridge does not reload
the Flash after the upgrade, the pages in the web-browser interface might not reflect the upgrade. This
example shows how to upgrade system software successfully using the archive download-sw command:
command on the CLI, you must use the force-reload option. If the access point or bridge does not reload
the Flash after the upgrade, the pages in the web-browser interface might not reflect the upgrade. This
example shows how to upgrade system software successfully using the archive download-sw command:
AP# archive download-sw /force-reload /overwrite tftp://10.0.0.1/image-name
Radio MAC Address Appears in ACU
When a Cisco Aironet client device associates to an access point running IOS software, the access point
MAC address that appears on the Status page in the Aironet Client Utility (ACU) is the MAC address
for the access point radio. The MAC address for the access point Ethernet port is printed on the label on
the back of the access point.
MAC address that appears on the Status page in the Aironet Client Utility (ACU) is the MAC address
for the access point radio. The MAC address for the access point Ethernet port is printed on the label on
the back of the access point.
Radio MAC Address Appears in Access Point Event Log
When a client device roams from an access point (such as access point alpha) to another access point
(access point bravo), a message appears in the event log on access point alpha stating that the client
roamed to access point bravo. The MAC address that appears in the event message is the MAC address
for the radio in access point bravo. The MAC address for the access point Ethernet port is printed on the
label on the back of the access point.
(access point bravo), a message appears in the event log on access point alpha stating that the client
roamed to access point bravo. The MAC address that appears in the event message is the MAC address
for the radio in access point bravo. The MAC address for the access point Ethernet port is printed on the
label on the back of the access point.
Mask Field on IP Filters Page Behaves the Same As in CLI
In Cisco IOS Release 12.2(8)JA and later, the mask that you enter in the Mask field on the IP Filters page
in the access point GUI behaves the same way as a mask that you enter in the CLI. If you enter
255.255.255.255 as the mask, the access point accepts any IP address. If you enter 0.0.0.0, the access
point looks for an exact match with the IP address that you entered in the IP Address field.
in the access point GUI behaves the same way as a mask that you enter in the CLI. If you enter
255.255.255.255 as the mask, the access point accepts any IP address. If you enter 0.0.0.0, the access
point looks for an exact match with the IP address that you entered in the IP Address field.
Repeater Access Points Running IOS Software Cannot Associate to Parent
Access Points Not Running IOS Software
Access Points Not Running IOS Software
Repeater access points running Cisco IOS software cannot associate to parent access points that do not
run IOS software (340 series access points and 350 and 1200 series access points that have not been
converted to run IOS software).
run IOS software (340 series access points and 350 and 1200 series access points that have not been
converted to run IOS software).
Repeater Access Points Cannot Be Configured as WDS Access Points
Repeater access points do not support WDS. You cannot configure a repeater access point as a WDS
access point, and if a root access point becomes a repeater in fallback mode, it cannot provide WDS.
access point, and if a root access point becomes a repeater in fallback mode, it cannot provide WDS.