Cisco Cisco Aironet 350 Workgroup Bridges 릴리즈 노트

This section describes errors, omissions, and changes in user documentation for workgroup bridges.

The bridge’s web-browser management system includes a Wired LAN stale out time setting on the 
Configuration — Ethernet page. Use this setting to control the number of seconds the bridge continues 
to track a device in its association table when the device is inactive. Enter a value between 5 and 1000 
seconds. (Five minutes equals 300 seconds; ten minutes equals 600 seconds.)

If the same devices are always connected to the workgroup bridge, enter 5 for the staleout time setting. 
If the devices connected to the bridge change frequently, enter 300 (equal to five minutes) for the staleout 
time setting. If you unplug the Ethernet cable from the bridge and plug it back in, the bridge removes all 
devices from its association table and re-learns them regardless of the stale out time setting.

Use the following documents with this document:

The following sections explain how to obtain documentation from Cisco Systems.

You can access the most current Cisco documentation on the World Wide Web at the following URL:

Translated documentation is available at the following URL:

Cisco documentation and additional literature are available in a Cisco Documentation CD-ROM 
package, which is shipped with your product. The Documentation CD-ROM is updated monthly and may 
be more current than printed documentation. The CD-ROM package is available as a single unit

 

or 

through an annual subscription.