Cisco Cisco Aironet 350 Wireless Bridge 기술 매뉴얼

Complete these steps in order to configure the Local RADIUS Server feature with the GUI:

From the menu in the left−hand side , choose the Server Manager tab under the Security menu.

Configure the server and mention the IP address of this access point, which is 10.77.244.194
in this example.

a. 

Mention the port numbers 1812 and 1813 on which the Local Radius server listens.

b. 

Specify the shared secret to be used with the Local RADIUS Server as shown in the figure.

c. 

1. 

From the menu in the left−hand side, click the Encryption Manager tab under the Security menu.

Specify the VLAN to be applied.

a. 

Specify that WEP encryption is to be used.

b. 

Specify that its use is MANDATORY.

c. 

Initialize any WEP key with a 26−digit hexadecimal character. This key is used to encrypt
broadcast and multicast packets. This step is optional.

d. 

Set the key size to 128 bits. You can also choose 40 bits. In this case, the WEP key size in the
previous step must be a 10−digit hexadecimal character. This step is optional.

e. 

You can also enable broadcast key rotation and specify the time after which the broadcast key
is changed. If it is disabled, the broadcast key is still used but not changed. This step is
optional.

Note:  These steps are repeated for every VLAN that uses LEAP authentication

f. 

Click Apply.

g. 

2.