Cisco Cisco Aironet 1524 Lightweight Outdoor Mesh Access Point 설치 가이드

Translated versions of all safety warnings are available in the safety warning document that shipped with 
your access point or on Cisco.com. To browse to the document on Cisco.com, refer to the 

 for instructions.

IMPORTANT SAFETY INSTRUCTIONS
This warning symbol means danger. You are in a situation that could cause bodily injury. Before you 
work on any equipment, be aware of the hazards involved with electrical circuitry and be familiar 
with standard practices for preventing accidents. Use the statement number provided at the end of 
each warning to locate its translation in the translated safety warnings that accompanied this device. 
Statement 1071
SAVE THESE INSTRUCTIONS

Do not operate the unit near unshielded blasting caps or in an explosive environment unless the 
device has been modified to be especially qualified for such use. Statement 364

This equipment must be externally grounded using a customer-supplied ground wire before power is 
applied. Contact the appropriate electrical inspection authority or an electrician if you are uncertain 
that suitable grounding is available. Statement 366

Read the installation instructions before connecting the system to the power source. Statement 1004

Ultimate disposal of this product should be handled according to all national laws and regulations. 
Statement 1040

Follow the guidelines in this section to ensure proper operation and safe use of the access point.

This system has been evaluated for RF exposure for Humans in reference to the ICNIRP (International 
Commission on Non-Ionizing Radiation Protection) limits. The minimum separation distance from the 
antenna to the user is 7.9 inches (20 centimeters).

Additional information on EMF / RF exposure is discussed in the Cisco white paper Wireless Systems 
and RF Safety Issues. The paper is on cisco.com at the following link: