Cisco Cisco Identity Services Engine 1.3
Procedure
Step 1
Open a browser and enter the IP address of the WSA. The first time you run the System Setup Wizard, use the default IP
address: https://192.168.42.42:8443 -or http://192.168.42.42:8080 where 192.168.42.42 is the default IP address, 8080 is
the default admin port setting for HTTP, and 8443 is default admin port for HTTPS. If the appliance is already configured,
use the IP address of the M1 port.
address: https://192.168.42.42:8443 -or http://192.168.42.42:8080 where 192.168.42.42 is the default IP address, 8080 is
the default admin port setting for HTTP, and 8443 is default admin port for HTTPS. If the appliance is already configured,
use the IP address of the M1 port.
Step 2
Enter the username and password to when the appliance login screen appears. By default, the appliance ships with the
following username and password:
following username and password:
• Username: admin
• Password: ironport
Step 3
Choose System Administration > System Setup Wizard to open the welcome page that contains four tabs: Start,
Network, Security, and Review.
Network, Security, and Review.
Step 4
If the appliance is already configured, you will be warned that you are about to reset the configuration. To continue with
the System Setup Wizard, click the Reset Configuration button. The appliance will reset and the browser will refresh
to the appliance home screen.
the System Setup Wizard, click the Reset Configuration button. The appliance will reset and the browser will refresh
to the appliance home screen.
Step 5
In the Start tab, read and accept the terms of the end user license agreement.
Step 6
Click Begin Setup to continue.
Step 7
In the Network tab, configure all settings using the provided reference tables as required.
Step 8
In the Security tab, configure all settings.
Step 9
In the Review tab, review the configuration information. If you need to change an option, click the Edit button for that
section.
section.
Step 10
Click Install This Configuration.
Next Steps page should appear once the configuration is installed. However, depending on the IP, hostname, or DNS
settings you configured during setup, you may lose connection to the appliance at this stage. If a "Page not found" message
is displayed in your browser, change the URL to reflect any new address settings and reload the page. Then continue with
any post setup tasks you wish to perform.
Next Steps page should appear once the configuration is installed. However, depending on the IP, hostname, or DNS
settings you configured during setup, you may lose connection to the appliance at this stage. If a "Page not found" message
is displayed in your browser, change the URL to reflect any new address settings and reload the page. Then continue with
any post setup tasks you wish to perform.
Configure ISE Features on WSA
Before You Begin
• Obtain the ISE server hostname or IP address.
• Obtain WSA client authentication certificate and key files, if you are using an externally generated certificate/key combination.
• Obtain the ISE Admin certificate for WSA data initialization.
• Obtain the ISE pxGrid certificate for WSA data subscription.
10