Cisco Cisco Aironet 1572EC Outdoor Access Point 데이터 시트

 

 

© 2015 Cisco and/or its affiliates. All rights reserved. This document is Cisco Public Information. 

Page 5 of 17 

The 1570 Series requires, at a minimum, AP software release 8.0MR or later (see Table 5). Traditionally, additional 

functions are available for the AP with more recent releases. Please see the applicable release notes for more 

information about features available with the latest software releases. You can specify the AP to be loaded and 

shipped with the default uni

fied software as either “unified mesh” (SW1570-UM01A01-K9) or “unified local” 

(SW1570-UL01A01-K9) mode during the ordering process. 

Minimum AP Software Releases 

SW Cisco AP1570: Unified Mesh (e.g., 8.0.xxx) + IOS (e.g., 15.2.4-yyy); IOS added when available 

SW Cisco AP1570: Unified Local (e.g., 8.0.xxx) + IOS (e.g., 15.2.4-yyy); IOS added when available 

4. Cisco Aironet 1570 Series Components 

The Aironet 1572IC access point has four internal dual-band (2.4- and 5-GHz) antennas that reside under a sealed 

random and cannot be accessed or configured by the user. 

The Aironet 1572EAC and 1572EC access points are equipped with four separate N-type female connectors that 

carry dual-band signals or, through software control, can be configured such that the bottom pair of connectors 

carry only 2.4-GHz signals and the top pair carry only 5-GHz signals. This gives users multiple configuration 

options, as shown in Figure 1. 

Figure 1.    Antenna Configuration Options