Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

Software Upgrade

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide

117

 

The access point reboots. A reboot confirmation dialog and follow-on rebooting 
status message displays. Please wait for the reboot process to complete, which 
might take several minutes. 

The Configuration Utility is not accessible until the access point has rebooted.

For maintenance purposes or as a troubleshooting measure, you can reboot the 
access point. To reboot the access point, click the Reboot button on the 
Configuration page.

As new versions of the access point software become available, you can upgrade 
the software on your devices to take advantage of new features and 
enhancements. The access point uses a TFTP client for software upgrades. You 
can also use HTTP to perform software upgrades.

When you upgrade the software, the access point retains the existing configuration 
information.

By default, the access point uses HTTP for software upgrades instead of TFTP.

Use the following steps to upgrade the software on an access point by using 
TFTP:

Click the Software Upgrade tab in the Administration section.

Information about the current software version is displayed and an option to 
upgrade a new software image is provided.