Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

Managing Access Points in the Cluster

130

Cisco AP541N Dual-band Single-radio Access Point Quick Start Guide

Clusters can contain a mixture of access points with two radios and access points 
with a single radio. When the configuration of a single-radio access point in the 
cluster changes, the access point propagates the change to the first radio of all 
cluster members. The configuration of the second radio on any dual-radio access 
points in the cluster is not affected. 

If a cluster contains only single-radio access points and a dual radio access point 
joins the cluster, then only radio 1 on the dual-radio access point is configured with 
the cluster configuration. Radio 2 on the access point remains as it was prior to 
joining the cluster. However, if the cluster already has at least one dual-radio 
access point, then the second radio of the access point joining the cluster is 
configured with the cluster settings.

The Access Points tab allows you to start or stop clustering on an access point, 
view the cluster members, and configure the location and cluster name for a 
cluster member. From the Access Points page, you can also click the IP address of 
each cluster member to navigate to configuration settings and data on an access 
point in the cluster. 

To view information about cluster members and to configure the location and 
cluster of an individual member, click the Access Points tab.