Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

Configuring and Viewing Channel Management Settings

Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide

148

 

The 

Proposed Channel Assignments shows the last channel plan. The plan 

lists all access points in the cluster by IP Address, and shows the current and 
proposed channels for each access point. Locked channels will not be re-
assigned and the optimization of channel distribution among access points will 
take into account the fact that locked access points must remain on their current 
channels. access points that are not locked may be assigned to different channels 
than they were previously using, depending on the results of the plan.

Click Locked to force the access point to remain on 
the current channel.

When Locked is selected (enabled) for an access 
point, automated channel management plans do not 
re-assign the access point to a different channel as a 
part of the optimization strategy. Instead, access 
points with locked channels are factored in as 
requirements for the plan.

If you click Apply, you will see that locked access 
points show the same channel for the Current 
Channel and Proposed Channel fields. The locked 
access points keep their current channels.

IP address for the access point.

Radio channel on which this access point is currently 
broadcasting.

Radio channel to which this access point would be 
re-assigned if the Channel Plan is executed.