Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼
Status
Traffic Statistics
29
Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide
2
Wired Settings
The Wired Settings include the MAC address, management VLAN ID, IP address,
subnet mask, and DNS information. To change any of these settings, click Edit to
be redirected to the Setup > LAN Settings page.
subnet mask, and DNS information. To change any of these settings, click Edit to
be redirected to the Setup > LAN Settings page.
For information about configuring these settings, see
.
Wireless Settings
The Wireless Settings section indicates the status of the wireless radio, and
includes the Radio Mode and Channel. The Wireless Settings section also shows
the MAC address (read-only) associated with each wireless radio interface.
includes the Radio Mode and Channel. The Wireless Settings section also shows
the MAC address (read-only) associated with each wireless radio interface.
To change the Radio Mode or Channel settings, click Edit. You are redirected to the
Wireless > Radio Settings page.
Wireless > Radio Settings page.
For information about configuring these settings, see
.
Traffic Statistics
The Traffic Statistics page provides basic information about the access point, a
real-time display of the transmit and receive statistics for the Ethernet interface,
and VAP (Virtual Access Point) statistics. The transmit and receive statistics are
totals since the access point was last started. If you reboot the access point, these
figures indicate transmit and receive totals since the reboot.
real-time display of the transmit and receive statistics for the Ethernet interface,
and VAP (Virtual Access Point) statistics. The transmit and receive statistics are
totals since the access point was last started. If you reboot the access point, these
figures indicate transmit and receive totals since the reboot.
To view transmit and receive statistics for the access point, click the Traffic
Statistics tab. Click Refresh to refresh the page.
Statistics tab. Click Refresh to refresh the page.