Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

4

Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide

54

 

The Physical Layer (PHY) standard the wireless radio uses.

If the Wireless Radio Interface is set to Off, the Mode 

cannot be changed.

The modes available on your access point depend on 

the country code setting. 

Select one of the following modes for the wireless radio 
interface:

•

802.11a. Only 802.11a clients can connect to the access 
point.

•

802.11b/g. 802.11b and 802.11g clients can connect to 
the access point.

•

802.11a/n. 802.11a clients and 802.11n clients operating 
in the 5-GHz frequency can connect to the access point.

•

802.11b/g/n (default). 802.11b, 802.11g, and 802.11n 
clients operating in the 2.4-GHz frequency can connect 
to the access point.

•

2.4 GHz 802.11n. Only 802.11n clients operating in the 
2.4-GHz frequency can connect to the access point.

•

5 GHz 802.11n.Only 802.11n clients operating in the 5-
GHz frequency can connect to the access point.