Cisco Cisco AP541N Wireless Access Point 관리 매뉴얼

Modifying Advanced Settings

Cisco AP 541N Dual-band Single-radio Access Point Quick Start Guide

90

 

Check the transmission rate sets you want the access point 
to support and the basic rate sets you want the access point 
to advertise:

•

Rate is expressed in megabits per second.

•

Supported indicates rates that the access point 
supports. You can check multiple rates (click a check 
box to select or de-select a rate). The access point 
automatically chooses the most efficient rate based 
on factors like error rates and distance of client 
stations from the access point.

•

Basic indicates rates that the access point will 
advertise to the network for the purposes of setting up 
communication with other access points and client 
stations on the network. It is generally more efficient to 
have an access point broadcast a subset of its 
supported rate sets.

Enabling multicast and broadcast rate limiting can improve 
overall network performance by limiting the number of 
packets transmitted across the network. 

By default the Multicast/Broadcast Rate Limiting option is 
enabled. When Multicast/Broadcast Rate Limiting is 
disabled, the Rate Limit and Rate Limit Burst fields cannot be 
modified.

Enter the rate limit you want to set for multicast and 
broadcast traffic. The limit should be greater than 1; the max 
value is 100 packets per second (pps). Any traffic that falls 
below this rate limit will always conform and be transmitted 
to the appropriate destination.

The default rate limit setting is 100 packets per second.

Setting a rate limit burst determines how much traffic bursts 
can be before all traffic exceeds the rate limit. This burst limit 
allows intermittent bursts of traffic on a network above the 
set rate limit.

The rate limit burst range is 1-150 packets per second. The 
default rate limit burst setting is 150 packets per second.