Cisco Cisco AP541N Wireless Access Point 릴리즈 노트
6
Cisco Small Business AP541N Access Point Release Notes for Versions 1.7.2 through 2.0.4
Release Notes
CSCth12675—MAC Filtering Set To Block Fails to Block Access
If you set MAC Filtering to block specified addresses, the device fails to prevent
association and authentication.
Workaround: None
association and authentication.
Workaround: None
Closed Caveats
CSCth09954—CCA Fails Due to an Incorrectly Propagated Device Name
The device name AP 541NA-K9 was propagated by CDP advertisements
received by UC520 devices. The name should have been AP541N-A-K9 (no
space). The space between AP and 541NA-K9 prevented Cisco Configuration
Assistant (CCA) from accessing the AP 541N for configuration.
received by UC520 devices. The name should have been AP541N-A-K9 (no
space). The space between AP and 541NA-K9 prevented Cisco Configuration
Assistant (CCA) from accessing the AP 541N for configuration.
Caveats for Version 1.9.0
Open Caveats
CSCtg53062—Configuration Interface Allows More Than 10 Cluster Members
The configuration interface allows more than 10 cluster members, but adding
more than 10 cluster members degrades the performance of the device. This
includes the Network Neighborhood sometimes showing NULL signal strength.
Workaround: We recommend that a cluster not exceed 10 members.
more than 10 cluster members degrades the performance of the device. This
includes the Network Neighborhood sometimes showing NULL signal strength.
Workaround: We recommend that a cluster not exceed 10 members.
Closed Caveats
The following caveats have been resolved in version 1.9.0:
CSCtg28316—WL Driver Multicast Queue Freezes
After a period of time, the access point stops forwarding Multicast or Broadcast
frames. Also, the last frame on the MCast queue is not always cleared.
frames. Also, the last frame on the MCast queue is not always cleared.
CSCtg28338—WPA Key Refresh Freezes
If during disassociation the access point is refreshing a client broadcast key, that
client is not accounted for and the WPA key state machine freezes.
client is not accounted for and the WPA key state machine freezes.