Cisco Cisco WAP4410N Wireless-N Access Point - PoE Advanced Security 관리 매뉴얼
Connecting the Cisco WAP4410N Access Point
Connecting the Cisco WAP4410N Access Point to the Network
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
18
4
The lights on the front panel light up as soon as the Cisco WAP4410N Access
Point powers on.
Point powers on.
Using a Standard Switch or Router
To connect the Cisco WAP4410N to your network using a standard switch or
router, follow these steps.
router, follow these steps.
STEP 1
Use the supplied Ethernet cable to connect the Ethernet port of the access point
to an Ethernet port on the switch.
to an Ethernet port on the switch.
STEP 2
Connect the included power adapter to the Power port of the Cisco WAP4410N
Access Point.
Access Point.
STEP 3
Plug the power adapter into an electrical outlet.
The lights on the front panel light up as soon as the Cisco WAP4410N Access
Point powers on.
Point powers on.