Cisco Cisco WAP4410N Wireless-N Access Point - PoE Advanced Security 관리 매뉴얼
Configuring the Cisco WAP4410N Wireless-N Access Point
Wireless
WAP4410N Wireless-N Access Point with Power Over Internet Administration Guide
28
6
c. To use a name and password for authentication, click Authentication via Name
and Password and enter the name and password in the corresponding fields.
STEP 6
Click Save.
Wireless
The Wireless section describes how to configure the wireless settings of the
access point.
access point.
Basic Settings
The Wireless > Basic Settings page displays the basic wireless network settings.
To configure the basic attributes for this access point, follow these steps:
To configure the basic attributes for this access point, follow these steps:
STEP 1
Click Wireless > Basic Settings.
STEP 2
From the Wireless Network Mode field, select one of the following modes:
•
Disable—Disables wireless connectivity completely. This might be useful
during system maintenance.
during system maintenance.
•
B-Only—Connects all the wireless client devices to the access point at
Wireless-B data rates with maximum speed at 11 Mbps.
Wireless-B data rates with maximum speed at 11 Mbps.
•
G-Only—Connects both Wireless-N and Wireless-G client devices at
Wireless-G data rates with maximum speed at 54Mbps. Wireless-B clients
cannot be connected in this mode.
Wireless-G data rates with maximum speed at 54Mbps. Wireless-B clients
cannot be connected in this mode.
•
N-Only—Connects only Wireless-N client devices at Wireless-N data rates
with maximum speed at 300 Mbps. See
with maximum speed at 300 Mbps. See
for more information.
•
B/G-Mixed—Connects both Wireless-B and Wireless-G client devices at
their respective data rates. Wireless-N devices can be connected at
Wireless-G data rates.
their respective data rates. Wireless-N devices can be connected at
Wireless-G data rates.
•
B/G/N-Mixed—(Default) Connects all the wireless client devices at their
respective data rates in this mixed mode.
respective data rates in this mixed mode.
STEP 3
From the Wireless Channel drop-down menu, select the appropriate channel to be
used among your access point and client devices. The default is channel 6.
used among your access point and client devices. The default is channel 6.