Cisco Cisco Packet Data Gateway (PDG) 전단

 

 

 

Ranap Reset Ack Timer 

The timer value, in seconds, that defines how long the HNB-GW waits for a RESET ACK 
message from the MSC after transmitting a RESET message. This setting is used only if the 
HNB-GW Initiated RANAP Reset function is enabled. 

  Before StarOS 14.0 release, this counter was displayed in 

show 

hnbgw-service

 command outputs. 

Ranap Reset Maximum 
Retransmissions 

Sets the maximum number of retries allowed for the HNB-GW to transmit a RANAP RESET 
message to the MSC if the RESET ACK timer expires. This setting is used only if the HNB-GW 
Initiated RANAP Reset function is enabled. 

  Before StarOS 14.0 release, this counter was displayed in 

show 

hnbgw-service

 command outputs. 

Ranap Reset Guard Timer 

The timer that the HNB-GW starts after receiving a RESET message from the CS core network. 
While this timer is running, the HNB-GW discards any new RESET messages that it receives. 

  Before StarOS 14.0 release, this counter was displayed in 

show 

hnbgw-service

 command outputs. 

Global RNC-Id 

This group displays the information related to global Radio Network Controller settings for use by 
the CS core network for HNB-GW service(s) on a chassis. It is configured under the PLMN-ID. 

MCC 

The Mobile Country Code defined for use with this HNB-GW service. It consists of the first 3 
digits of the Available Radio Network PLMN ID. 

MNC 

The Mobile Network Code defined for use with this HNB-GW service. It consists of the last 3 
digits of the Available Radio Network PLMN ID. 

Id 

The Radio Network Controller ID provided to HNBs for use by the CS core network for this 
HNB-GW service. It is configured under the PLMN-ID