Cisco Cisco Packet Data Gateway (PDG)
Software Management Operations
Understanding the Local File System ▀
ASR 5000 System Administration Guide, StarOS Release 18 ▄
131
terminal-speed configuration: This parameter identifies the data transfer rate at which a serial interface
communicates on the console port. The default setting for this parameter is 115200 bps (115.2 Kbps). You can
change this and other settings with RS-232 Port Configuration Mode commands.
change this and other settings with RS-232 Port Configuration Mode commands.
boot stack information: The boot stack is made up of prioritized file group entries that designate the operating
system image file and the CLI configuration file to load.
When a system is unpacked and started for the first time, the boot.sys file is configured to use the normal boot mode and
load the operating system software image from the /flash directory.
load the operating system software image from the /flash directory.
There is no CLI configuration file contained on the local file system. This causes the system to automatically start its
CLI-based Quick Setup Wizard upon the first successful boot. Refer to Getting Started for more information on using
the Quick Setup Wizard.
CLI-based Quick Setup Wizard upon the first successful boot. Refer to Getting Started for more information on using
the Quick Setup Wizard.