Cisco Cisco Packet Data Gateway (PDG)
threshold pdif-current-active-sessions
Configures alarm or alert thresholds for monitoring the total number of currently active Packet Data
Interworking Function (PDIF) sessions.
Interworking Function (PDIF) sessions.
Product
PDIF
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration
configure
Entering the above command sequence results in the following prompt:
[local]
host_name
(config)#
Syntax Description
threshold pdif-current-active sessions high_thresh [ clear low_thresh ]
high_thresh
Configures the total number of active PDIF sessions to be monitored on a chassis. high_thresh is any integer
from 0 through 1000000.
from 0 through 1000000.
There is no default, but 0 means that there is no threshold monitoring.
clear low_thresh
Clears the specified number of sessions being monitored using the high_thresh variable defined above.
low_thresh is any integer from 0 through 1000000.
low_thresh is any integer from 0 through 1000000.
Usage Guidelines
Thresholds are provided for monitoring the overall PDIF usage on a chassis. This command is used to monitor
the total number of active PDIF sessions for an entire chassis.
the total number of active PDIF sessions for an entire chassis.
Examples
The following command configures a monitoring threshold of 300000 and a clearing threshold of 100000
active PDIF sessions on a chassis:
threshold pdif-current-active-sessions 300000 clear 100000
active PDIF sessions on a chassis:
threshold pdif-current-active-sessions 300000 clear 100000
Command Line Interface Reference, Modes G - H, StarOS Release 19
564
Global Configuration Mode Commands (T-threshold phspc)
threshold pdif-current-active-sessions