Cisco Cisco Packet Data Gateway (PDG)
map ue-mac-to-imei
This command allows you to map the UE MAC received in the Calling-Station-Id RADIUS attribute to
IMEIsV in order to forward it in the GTP CPC message to the GGSN.
IMEIsV in order to forward it in the GTP CPC message to the GGSN.
Product
eWAG
Privilege
Security Administrator, Administrator
Command Modes
Exec > Global Configuration > Context Configuration > IPSG RADIUS Server Configuration
configure > context context_name > ipsg-service service_name mode radius-server
Entering the above command sequence results in the following prompt:
[
context_name
]
host_name
(config-ipsg-service-radius-server)#
Syntax Description
[ default | no ] map ue-mac-to-imei
default
If previously configured, disables mapping of UE MAC address to IMEIsV IE of GTP message in order to
forward it to GGSN.
forward it to GGSN.
Default: Mapping is disabled.
no
If previously configured, disables mapping of UE MAC address to IMEIsV IE of GTP message in order to
forward it to GGSN.
forward it to GGSN.
Usage Guidelines
Use this command to enable or disable mapping of UE MAC address to IMEIsV IE of GTP message in order
to forward it to GGSN.
to forward it to GGSN.
Command Line Interface Reference, Modes I - Q, StarOS Release 19
135
IPSG RADIUS Server Configuration Mode Commands
map ue-mac-to-imei